Devices

Jetibox

CEX can simulate a Jetibox to read telemetry from legacy Jeti devices.

• Enable: It can be enabled or disabled by the user.
• SCI Port: A SCI port must be selected. The available options are: SCI A, SCI B or SCI C.

Besides, a configuration is needed in the Serial and I/O Setup panels.

An example of this can be seen in the Jetibox - Integration examples section of the present manual.

Scorpion tribunus

CEX can read telemetry from Tribunus ESCs by connecting it to one of its serial ports.

The following parameters are configurable:

• Enable: It can be enabled or disabled by the user.
• Telemetry period.
• MCU telemetry 1/2 period: Telemetry period for MCU devices.
• PWM ID: PWM ID associated to the Scorpion Tribunus.

The serial port has to be configured in the I/O Setup section.

An example of this can be seen in the Scorpion tribunus - Integration examples ` section of this manual.